ROC-RK3328-CC-2GB
|
Số lượng mua
(Cái)
|
Đơn giá
(VND)
|
| 1+ | 1.399.000 |
| 3+ | 1.379.000 |
Giao hàng toàn quốc
Thanh toán khi nhận hàng
Cam kết đổi/trả hàng
Thông số
6 Sản phẩm tương tự| Thuộc tính | Giá trị | Tìm kiếm |
|---|---|---|
| RoHS |
|
|
| 6 Sản phẩm tương tự | ||
Mô tả sản phẩm
- Rockchip RK3328 4 nhân, phát triển dựa trên Cortex A53
- Nhân đồ họa GPU Mali-450MP2
- 1/2/4GB RAM LPDDR3 bus 1866 MHz
- Có khe micro SD hỗ trợ thẻ nhớ
- Cổng HDMI 2.0a hỗ trợ nội dung 4K @ 60 Hz và HDR10, HLG
- Giắc cắm tai nghe 3,5mm có khả năng truyền âm thanh stereo và tiếng của video
- Hộ trợ định dạng 4K VP9, H.265 và H.264, 1080p VC-1, MPEG-1/2/4, VP6/8
- Cổng Gigabit Ethernet
- 2 cổng USB 2.0, 1 cổng USB 3.0
- Cổng hồng ngoại, cổng nguồn, nút khởi động lại và nút hồi phục
- Máy hỗ trợ nhiều giao diện, bao gồm cả Pi-2 Bus và Pi-P5+ Bus
- Kích thước: 85 x 56 mm
Tạo thẻ SD Linux
Prepare
-
ROC-RK3328-CC Development board
-
Firmware
-
Linux Host Computer
Please refer to 《Build Kernel》 and 《Build Ubuntu Rfs》 instructions to compile partition images, or you can download here to obtain a unified firmware.
Process of Making Linux Boot Card
using SDCard Installer tools for windows
For windows users, you can select SDCard Installer tool Download link of tool:SDCard Installer
The SDCard Installer tool will be able to download ,burn and write the fireware in place,and the operation is simple and straightforward.
1、After inserting the SD card into the computer, open SDCard Installer.
2、Click the "Choose an OS"button, After selecting ROC-RK3328-CC,display the figure.
3、As shown in the figure, there are five choices:
1) if there is no demand operating system in the local area, you need to download and select the operating system you need. Click OK.
2) if there is a local operating system with requirements, after clicking Browse image, select the system and click OK.
4、After completing the above steps, the computer also recognizes the SD card, clicks FLASH, and waits for completion.
Note: when the burn is completed to 99% or 100%, the following picture is presented, which can be ignored, and does not affect the firmware burning on the SD card.
5、After finishing the burn, the SD card will be removed from the computer and inserted into the TF card slot of rk3328,restart rk3328 is OK.
using scripts to make
you need to use Linux dd command to write the startup files into the SD card, the steps are as follows:
-
Compile the kernel ,and u-boot:
see 《Build Kernel》
-
Make Ubuntu rootfs
-
Synthesis system.img file for the production of the boot card in the next step
build/mk-image.sh -c rk3328 -t system -r rk-rootfs-build/linaro-rootfs.imgRun the following command to write the unified firmware system.img generated above into the SD card:
build/flash_tool.sh -c rk3328 -d /dev/sdb -p system -i out/system.imgusing dd command to make
Here you also need to insert the SD card to the computer
Run the following command to write the unified firmware system.img into the SD card:
pv -tpreb out/system.img | sudo dd of=/dev/sdb seek=0 conv=notrunc && syncYou can also run the following commands to write a partitioned image into an SD card
sudo dd if=./out/u-boot/idbloader.img of=/dev/sdb seek=64
conv=sync,fsync sudo dd if=./out/u-boot/uboot.img
of=/dev/sdb seek=16384 conv=sync,fsync sudo dd if=./out/u-boot/trust.img
of=/dev/sdb seek=24576 conv=sync,fsync sudo dd if=./out/boot.img
of=/dev/sdb seek=32768 conv=sync,fsync sudo dd if=./out/linaro-rootfs.img
of=/dev/sdb seek=262144 conv=sync,fsyncTạo thẻ SD Android
Prepare
-
ROC-RK3328-CC Development board
-
Firmware
-
Windows Host Computer
-
SD_Firmware_Tool
Please refer to 《Build Kernel》 and 《Build Ubuntu Rfs》 instructions to compile partition images, or you can download here to obtain a unified firmware.
Process of Making Android Boot Card
using SDCard Installer tools for windows
For windows users, you can select SDCard Installer tool Download link of tool:SDCard Installer
The SDCard Installer tool will be able to download ,burn and write the fireware in place,and the operation is simple and straightforward.
1、After inserting the SD card into the computer, open SDCard Installer.
2、Click the "Choose an OS"button, After selecting ROC-RK3328-CC,display the figure.
3、As shown in the figure, there are five choices:
1) if there is no demand operating system in the local area, you need to download and select the operating system you need. Click OK.
2) if there is a local operating system with requirements, after clicking Browse image, select the system and click OK.
4、After completing the above steps, the computer also recognizes the SD card, clicks FLASH, and waits for completion.
Note: when the burn is completed to 99% or 100%, the following picture is presented, which can be ignored, and does not affect the firmware burning on the SD card.
5、After finishing the burn, the SD card will be removed from the computer and inserted into the TF card slot of rk3328,restart rk3328 is OK.
Linux
1）if you want to compile the Android unified firmware:
see ：《Compile Android 7.1 fireware》
2）If you want to update the partition image into the SD card separately under Linux, you can refer to the following commands:
sudo dd if=uboot.img of=/dev/sdb seek=$(((0x00002000 + 0x00002000)))
ibs=1M conv=sync,fsync sudo dd if=trust.img
of=/dev/sdb seek=$(((0x00004000 + 0x00004000))) ibs=1M conv=sync,fsync sudo dd if=misc.img
of=/dev/sdb seek=$(((0x00002000 + 0x00008000))) ibs=1M conv=sync,fsync sudo dd if=resource.img
of=/dev/sdb seek=$(((0x00007800 + 0x0000A800))) ibs=1M conv=sync,fsync sudo dd if=kernel.img
of=/dev/sdb seek=$(((0x00010000 + 0x00012000))) ibs=1M conv=sync,fsync sudo dd if=boot.img
of=/dev/sdb seek=$(((0x00010000 + 0x00022000))) ibs=1M conv=sync,fsync sudo dd if=recovery.img
of=/dev/sdb seek=$(((0x00010000 + 0x00032000))) ibs=1M conv=sync,fsync sudo dd if=system.img
of=/dev/sdb seek=$(((0x00300000 + 0x000AC000))) ibs=1M conv=sync,fsync