Phản hồi mới
Sản phẩm đã xem


Smart Card Interface IC, 64-HVQFN, NXP

Thương hiệu:NXP

Hết hàng(Đặt mua 7-10 ngày có hàng)

Số lượng mua:

0 Phản hồi

Bảng giá

Số lượng mua
Đơn giá


TDA8024,34,35 Brief

Standard Package



Integrated Circuits (ICs)


Interface - Controllers



Controller Type

Smart Card Interface



Voltage - Supply

2.7 V ~ 5.5 V

Current - Supply


Operating Temperature


Mounting Type

Surface Mount

Package / Case

64-VFQFN Exposed Pad

Supplier Device Package



Tape & Reel (TR)


General description


The TDA8035 is the cost efficient successor of the well established integrated contact smart card reader IC TDA8024. It offers a high level of security for the card performing current limitation, short circuit detection, ESD protection as well as supply supervision. Operating in 3 V supply domain, the current consumption during the standby mode of the contact reader is very low and is therefore the ideal component for a power efficient contact reader.

Back to top


Features and benefits


2.1 Protection of the contact smart card

  • Thermal and short-circuit protections on all card contacts
  • Vcc regulation:
    • 5 V, 3 V, 1.8 V ± 5 % on 2 × 220 nF multilayer ceramic capacitors with low ESR
    • current spikes of 40 nA/s (Vcc = 5 V and 3 V) or 15 nA/s (Vcc = 1.8 V) up to 20 MHz, with controlled rise and fall times, filtered overload detection approximately 120 mA
  • Automatic activation and deactivation sequences initiated by software or by hardware in the event of a short-circuit, card take-off, overheating, falling VREG VDD(INTF),VDDP
  • Enhanced card-side ElectroStatic Discharge (ESD) protection of (> 8 kV)
  • Supply supervisor for killing spikes during power on and off:
    • threshold internally fixed
    • externally by a resistor bridge

2.2 Easy integration into your contact reader

  • SW compatible to TDA8024 and TDA8034
  • 5 V, 3 V, 1.8 V smart card supply
  • DC/DC converter for Vcc generation separately powered from 2.7 V to 5.5 V supply (VDDP and GNDP)
  • Very low power consumption in Deep Shutdown mode
  • Three protected half-duplex bidirectional buffered I/O lines (C4, C7 and C8 )
  • External clock input up to 26 MHz
  • Card clock generation up to 20 MHz using pins CLKDIV1 and CLKDIV2 with synchronous frequency changes of fXTAL, fXTAL/2, fXTAL/4 or fXTAL/8
  • Non-inverted control of pin RST using pin RSTIN
  • Built-in debouncing on card presence contact
  • Multiplexed status signal using pin OFFN
  • Chip Select digital input for parallel operation of several TDA8035 ICs.

2.2.1 Other

  • HVQFN32 package
  • Compliant with ISO 7816, NDS and EMV 4.2 payment systems
  • Back to top
  • Applications
  • ShowHide
  • Pay TV
  • Electronic payment
  • Identification

·         IC card readers for banking

Download datasheet

Phản hồi(0)


Đăng Nhập hoặc Đăng ký để chia sẻ.
Đang tải...
Sản phẩm nổi bật