Mạch XC6SLX16 SPARTAN6 Xilinx FPGA

Mạch XC6SLX16 SPARTAN6 Xilinx FPGA

Thương hiệu OEM
Mô tả 1Gb DDR3, 128Mb Flash, VGA, microSD, Jtag, USB
Hết hàng (Đặt mua để có hàng sớm)
Số lượng mua:
Min: 1
Bội số: 1
0 Phản hồi
Yêu thích
Số lượng mua (Cái)
Đơn giá (VND)
1+ 3.299.000
1+ 3.279.000

Giao hàng toàn quốc

Thanh toán khi nhận hàng

đổi trảCam kết đổi/trả hàng

Thuộc tính Giá trị Tìm kiếm
RoHS
ROHS
10 Sản phẩm tương tự

Mô tả sản phẩm

Data
User manual, principle diagram, principle Gallery, PCB, PCB library, factory procedure, Verilog source code, Verilog tutorial, MicroBlaze source code, MicroBlaze tutorial, UCF documents, Modelsom, software, ISE software, the module information, test manual etc.

Feature

  • XILINX FPGA XC6SLX16
  • 1000M Ethernet interface
  • 1Gbit DDR3
  • High speed USB 2.0 interface
  • 500M camera module
  • 16bit VGA interface
  • USB to serial
  • RTC
  • EEPROM
  • SD card seat
  • 40P Extended port
  • JTAG Debugger interface

Onboard Information

  • 1 FPGA XC6SLX16
  • 2 DDR3 1Gbit
  • 3 FLASH 128Mbit
  • 4 USB to serial
  • 5 High speed USB 2.0 interface
  • 6 VGA interface
  • 7 Ethernet interface
  • 8 Camera interface
  • 9 The 40Pin Extended port
  • 10 SD card socket
  • 11 RTC DS1302
  • 12 The 4 Independent key press + reset key
  • 13 Power interface
  • 14 Power switch
  • 15 JTAG interface
  • 16 EEPROM 24LCD04
  • 17 The 50M Active Crystal Oscillator
  • 18 USB to serial chip CP2102
  • 19 The 1000M network RTL8211
  • 20 USB chip CY7C68013

Xilinx Platform Cable USB Characteristic

  • Fully compatible with Platform Cable USB I, support ISE (including the latest 12.3), EDK, Chipscope and other software. Download the firmware all are 11.5 version, down support for a variety of low version of the software (at least ISE6.3.03 more than 7.1 above), the firmware can be automatically updated as the original line.
  • Based on the original factory CY7C68013A+XC2C256CPLD circuit structure
  • Supports Windows and Linux systems
  • Automatic detection and adaptation to target I/O voltage
  • Supports the use of 5V (TTL), 3.3V (LVCMOS), 2.5V, 1.8V and 1.5V interface level of the device
  • LED status indicator
  • SPI interface PROM flash devices for programming

Supports all XILINX devices, including

  • All Virtex FPGA devices (including virtex6)
  • All Spartan FPGA devices (including Spartan6)
  • XC9500/XC9500XL/XC9500XV CPLD devices (various voltage)
  • CoolRunner XPLA3/CoolRunner-II CPLD device
  • XC18V00 ISP PROM series
  • Platform Flash XCF00S/XCF00P/XL PROM series
  • XC4000 series FPGA

Shipping List
1xFPGA Board
1xMini USB Line
1xAcrylic Shell
1xEmulator
1x5V Power

 http://thegioiic.com/upload/large/6047.jpg

Đăng nhập