Giỏ hàng 0 item(s)

Giỏ hàng trống

Danh Mục
Sản phẩm mới
Đang tải...
Bình luận mới
Sản phẩm đã xem
TA600W Mạch tăng áp 600W

TA600W Mạch tăng áp 600W

600W, Tăng 10-60V lên 12-80V, 10A

0 Phản hồi ROHS

Nhà sản xuất: Chưa xác định

Liên hệ đặt hàng

Số lượng mua

1852 lượt xem

Bảng giá

Số lượng

600W power boost module, wide voltage input: 12V ~ 60V, 12V ~ 80V wide adjustable output voltage; output current can be adjusted; ultra-low input-output differentials.

Detailed parameters:
     Input voltage: 12V-60V
     Input Current: Maximum input current 15A
     Output voltage: 12V-80V continuously adjustable
     Output Current: Maximum output current 10A (adjustable)
     Output power: active power P = input voltage V * 10A
     Conversion efficiency: up to 95% (input voltage and current; output voltage and current affect the conversion efficiency)
Short circuit protection: Fuse
Module size: 73 * 51mm
Weight: 270g

1. Product materials chronological, using a custom radiator, size: radiator plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, fixed over a radiator booster board, rationalized design, integrated design radiators and boost board , user directly, using long screws fixed directly to use.

2. 27mm Kool using magnetic inductance ring, 1mm double-wound inductors, high-quality filter capacitor, enter a 1000uF63V electrolytic capacitor, the output of the two 470uF100V electrolytic capacitors, boost power output and better quality, on-board power supply switch, power indicator light, with voltage regulation, current adjustment potentiometer so that the output is more convenient, you can always adjust the output voltage, current size, using the 8500 input and output terminals, through a strong current capacity to ensure long and reliable operation. 

1. DIY an output adjustable vehicle power supply, only need to enter the access 12V supply, the output voltage can be (14V-80V) freedom continuously adjustable, but the output voltage can not be lower than the input voltage.

2. Universal car laptop power supply. 12V power input connected to the output regulation voltage into the notebook needs to work.

3. Boost charger, 12V power supply can be used for battery charging higher than 12V, such as 24V battery and charging current can be adjusted.
4. Electronic equipment supply, as long as the voltage is adjusted to the voltage required and current does not exceed the rated current can all be working properly.
5. System-level power supply before, when doing a project, the input of 10V-18V, 24V power supply system board around and need a lot of power, ordinary DC-DC module power is too small, then this module will be your best choice, without debugging directly on the machine can work easily achieve high efficiency power boost. 

Module Application examples:

1. Input voltage 12V Current 8.73A, boost output voltage 20V current 5.0A, module efficiency is about 86%, the output voltage, current stability
2. Input voltage 54V Current 13.5A, 58V output current 12A, use 5Ω1Kw resistance as a load test, the efficiency is 95%
3. Output 965W module test chart resistance as a load test using 5Ω1Kw

Bình luận(0)

Mã xác nhận*


Vui lòng Đăng Nhập hoặc Đăng ký để chia sẻ và tích luỹ điểm.
Đang tải...
Đang tải...
Bình chữa cháy