STM32F746NGH6 MCU, 128-Mbit Quad-SPI Flash, 128-Mbit SDRAM
0 Phản hồi
Nhà sản xuất: STMicroelectronics
Còn: 5 Cái
Bảo hành 1 tháng
The Discovery Kit helps explore the STM32F7 Series of microcontrollers based on the high-performance ARM® Cortex®-M7 32-bit core.
Smart architecture with new peripheral set, accomplish real-time capabilities, digital signal processing, and feature power efficiency. Suitable for a wide range of applications; Industrial control, air conditioning, security, video intercom, home audio appliances and Internet of Things to come.
STM32F746NGH6 microcontroller featuring 1MB of Flash memory and 340KB of RAM
On-board ST-LINK/V2-1 supporting USB re-enumeration capability
USB functions: virtual COM port, mass storage, debug port
4.3 inch (109.2mm) 480x272 pixels colour LCD-TFT with capacitive touch screen
Serial Audio Interfaces (SAI) audio codec
Audio line-in and line-out jack
Stereo speaker outputs
Two ST MEMS microphones
SPDIF RCA input connector
Two push buttons (user and reset)
128Mbit Quad-SPI Flash memory
128Mbit SDRAM (64Mbits accessible)
Connector for microSD card
RF-EEPROM daughterboard connector
USB OTG HS and USB OTG FS with Micro-AB connectors
Five power supply options: ST LINK/V2-1, USB FS and USB HS, VIN from Arduino connector, external 5V connector
3.3V or 5V power supply output for external applications
Arduino Uno V3 connectors
Comprehensive free software including a variety of examples, part of STM32Cube package
The STM32F7 series of very high-performance Microcontrollers with DSP and precision FPU (Floating Point Unit), based-on ARM® Cortex®-M7 core, delivers 1082 CoreMark / 462 DMIPS at 216MHz fCPU.
Smart architecture with new peripheral set around the Cortex®-M7, combined with a superior interconnect architecture with AXI and multi AHB bus matrix for interconnecting core, peripherals and memories, multiple DMA controllers, and the Chrom-ART graphic Accelerator™ hardware, optimizes the system performance.
Extended connectivity and audio support with two Serial Audio Interfaces (SAI) with SPDIF output support, three I²S half-duplex with SPDIF input support, two USB On-The-Go interfaces with dedicated power supply, and Dual-mode QuadSPI Flash interface.
Large SRAM with overloading architecture of 320Kbytes, including 64Kbytes of Data Tightly-Coupled Memory (TCM) RAM for low-latency memory, 16Kbytes of instruction TCM RAM, and 4Kbytes of backup SRAM.
Power efficiency is as low as 7 CoreMark/mW at 1.8V, achieving 100μA typical current consumption in Stop mode with all context and SRAM saved.
Create more responsive, innovative applications by releasing your creativity.