/upload/medium/1775.jpg

Phone

(8)3896.8699-0972924961

Giỏ hàng 0 item(s)

Giỏ hàng trống

Danh Mục
Sản phẩm mới
Đang tải...
Bình luận mới
Sản phẩm đã xem
STM32F103VET6 development board

STM32F103VET6 development board

3.2'' TFT touch screen, MP3, CAN, RS485, Host USB, Flash 128MB

4 Phản hồi ROHS

Nhà sản xuất: STMicroelectronics

Liên hệ đặt hàng

Số lượng mua

7092 lượt xem

Bảng giá

Số lượng
(Cái)
Giá(VND)
1
1,449,000
3
1,439,000
5
1,419,000
10
1,379,000

  • MCU: STM32F103VET6 from STMicroelectronics, incorporates the high-performance ARM® Cortex™-M3 32-bit RISC core operating at a 72 MHz frequency in LQFP100 package. The STM32F103VET6 offers high-speed embedded memories(512KB FLASH, 64KB RAM), 12-bit ADC, DAC, PWM, I2C, SPI, I2S, SDIO, USART, USB, CAN, and FSMC.
  • 3.2'' TFT LCD touch screen, 320*240 resolution, 262k color, 8/16 bit bus, IO controlling, Stand-Alone touch controller chip, supports 1 SD card(SPI) and 1 DATA FLASH for storage application, such as images, files, data, etc.
  • 128M NAND FLASH, IO controlling, customized updating is available(supports up to 1G, 2G, 4G, etc.).
  • Onboard high performance MP3/WMA/MIDI audio decoder and ADPCM encoder: VS1003. It is a single-chip MP3/WMA/MIDI audio decoder and ADPCM encoder. It contains a highperformance, proprietary low-power DSP processor core VS DSP4, working data memory, 5 KiB instruction RAM and 0.5 KiB data RAM for user applications, serial control and input data interfaces, 4 general purpose I/O pins, an UART, as well as a high-quality variable-sample-rate mono ADC and stereo DAC, followed by an earphone amplifier and a common buffer.
  • One USB host port, features a file manage and control chip: CH376, used to MCU system read/write file in USB Flash Drive or SD card. CH376 supports USB-Device Mode and USB-HOST Mode. Set the basic firmware of USB communication protocol in the inner. It is also set firmware of special communication protocol to deal with Mass-Storage devices, communication interface firmware of SD card, FAT16, FAT32 and FAT12 file system manage firmware in the inner. It supports common USB storage devices (contains USB Flash Drive/USB hard disk/USB Flash memory/USB reader) and SD cards (contain SD card with standard capacity and HC-SD card with high capacity, MMC card and TF card compatible with protocol).
    • Supports 1.5Mbps low-speed and 12Mbps full-speed, compatible with USB V2.0, only needs crystal and capacitance external.
    • USB-HOST Mode and USB-DEVICE Mode, automatically switch Host Mode and Device Mode.
    • Supports USB device control transfer, bulk transfer and interrupt transfer.
    • Detects USB device plug and unplug automatically and sends message to USB host.
    • Set file system manage firmware of FAT16, FAT32 and FAT12, support the capacity up to 32GB USB Flash Drive and SD Card.
    • Supply file manage function: open, create or delete file, enumerate and search file, create the sub-catalog, and support the long file name.
    • Supply 8-bit passive parallel interface with 2MB speed, support parallel data bus connect to MCU.
    • Supply SPI device interface with 2MB/24MHz speed, support SPI serial bus connect to MCU.
  • One Ethernet port, features a Microchip Stand-Alone Ethernet Controller with SPI Interface: ENC28J60. Onboard RJ45 connector with transformer and indicator LED.One USB device port(supported by STM32F103VET6)
    • IEEE 802.3™ Compatible Ethernet Controller
    • Fully Compatible with 10/100/1000Base-T Networks
    • Integrated MAC and 10Base-T PHY
    • Supports One 10Base-T Port with Automatic Polarity Detection and Correction
    • Supports Full and Half-Duplex modes
  • Communication Interfaces: one CAN, one RS485, two RS232
  • SD card slot that uses SPI interface
  • Memories: one EEPROM with I2C interface & one Data Flash with SPI interface
  • AD & DA function: one potentiometer for ADC input adjustment, Screw-terminated connectors for two channels ADC input & one channel DAC output
  • Human-Machine Interfaces: one buzzer, four user LEDs, one power indicator, one USB communication indicator, three user push-buttons, one joystick(five positions), one reset button
  • Powered from 5V DC or USB interface, configured via onboard jumper
  • Dimension: 15cm x 11cm

Phụ kiện

 

  • Firebull-STM32F103 development board
  • LCD 3.2"
  • USB Cable
  • Serial Cable
  • RJ45 Ethernet Cable
  • 5V Power Adapter 
  • User Guide CD(including datasheets, softwares, examples, and schematic)


MCU ARM 512KB FLASH MEM 100-LQFP
Giá : 85.000 đ /Cái
Còn : 19 Cái
Debug Adapter, ARM7, ARM9, Cortex-M, 8051, and C166 devices
Giá : 405.000 đ /Cái
Còn : 10 Cái
Segger V8 JTAG J-Link
Giá : 329.000 đ /Bộ
Còn : 7 Bộ
Bình luận(4)
 
Quyền - quyendt3k4@gmail.com
Thắc mắc (15h:13' - 02/11/2013)
Cho mình hỏi bên sản phẩm mua kèm có cả chip STM32F103VET6 vậy khi mình mua board phải mua chip rồi hàn vào à? hay công ty bán board hàn sẵn chip vậy?
 
Administrator - nnkhanh@giaolo.com
Mua board (10h:00' - 09/11/2013)
Board này đã có sẵn chip rồi, nhà sẵn xuất đã hàn và nạp chương trình rồi, mình chỉ việc dùng thôi. Sản phẩm mua kèm chỉ là sản phẩm đề nghị mua nếu cần.
 
tuannguyen - teobanhtrai@gmail.com
Keil starter kits (21h:39' - 27/11/2013)
anh cho em hỏi board này có phải thuộc dạng Keil starter kits không vậy. Em đang tìm mua keil starter kits, bên anh có bán kit tương tự cái này không anh http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1199/PF259443
 
quoclaptk - quoclaptk@gmail.com
Đăt mua STM32F103VET6 development board (09h:21' - 02/04/2015)
Tôi đã đặt mua STM32F103VET6 development board cách đay hai ngày và có liên lạc vào số điện thoại phía dưới nhưng ko được vậy cho tôi biết khi nào nhân dc và thanh toán thế nào

Mã xác nhận*

5DBgDv  

Vui lòng Đăng Nhập hoặc Đăng ký để chia sẻ và tích luỹ điểm.
Đang tải...
Đang tải...
Bình chữa cháy
Thegioiic-live-support