Danh Mục Sản Phẩm
Sản phẩm mới
20-M4-PS Vít Nhựa
Vít Nhựa M4, L=20mm, Ø=4mm
0 đ/Cái
18-M4-PS Vít Nhựa
Vít Nhựa M4, L=18mm, Ø=4mm
1,050 đ/Cái
15-M4-PS Vít Nhựa
Vít Nhựa M4, L=15mm, Ø=4mm
950 đ/Cái
6x25x1.5-LD3 Long Đền 201
d=6mm, dc=25mm, h=1.5mm
700 đ/Cái
6x20x1.5-LD3 Long Đền 201
d=6mm, dc=20mm, h=1.5mm
680 đ/Cái
12-M4-PS Vít Nhựa
Vít Nhựa M4, L=12mm, Ø=4mm
850 đ/Cái
Còn: 1000 Cái
10-M4-PS Vít Nhựa
Vít Nhựa M4, L=10mm, Ø=4mm
750 đ/Cái
Còn: 1000 Cái
6x20x1-LD3 Long Đền 201
d=6mm, dc=20mm, h=1mm
680 đ/Cái
Phản hồi mới


Quadruple Half-H Driver      

Nhà sản xuất: Texas Instruments

Hết hàng

Số lượng mua

0 Phản hồi 2333 lượt xem ROHS

Bảng giá

Số lượng
Đơn giá(VND)


  • 1-A Output-Current Capability Per Driver
  • Applications Include Half-H and Full-H
  • Solenoid Drivers and Motor Drivers
  • Designed for Positive-Supply Applications
  • Wide Supply-Voltage Range of 4.5 V to 36 V
  • TTL- and CMOS-Compatible
  • High-Impedance Diode-Clamped Inputs
  • Separate Input-Logic Supply
  • Thermal Shutdown
  • Internal ESD Protection
  • Input Hysteresis Improves Noise Immunity
  • 3-State Outputs
  • Minimized Power Dissipation
  • Sink/Source Interlock Circuitry Prevents
  • Simultaneous Conduction
  • No Output Glitch During Power Up or
  • Power Down
  • Improved Functional Replacement for the



 The SN754410 is a quadruple high-current half-H driver designed to provide bidirectional drive currents up to 1 A at voltages from 4.5 V to 36 V. The device is designed to drive inductive loads such as relays, solenoids, dc and bipolar stepping motors, as well as other high-current/high-voltage loads in positive-supply applications.

All inputs are compatible with TTL-and low-level CMOS logic. Each output (Y) is a complete totem-pole driver with a Darlington transistor sink and a pseudo-Darlington source. Drivers are enabled in pairs with drivers 1 and 2 enabled by 1,2EN and drivers 3 and 4 enabled by 3,4EN. When an enable input is high, the associated drivers are enabled and their outputs become active and in phase with their inputs. When the enable input is low, those drivers are disabled and their outputs are off and in a high-impedance state. With the proper data inputs, each pair of drivers form a full-H (or bridge) reversible drive suitable for solenoid or motor applications.

A separate supply voltage (VCC1) is provided for the logic input circuits to minimize device power dissipation. Supply voltage VCC2 is used for the output circuits.

The SN754410 is designed for operation from -40°C to 85°C. 


Download datasheet

Phản hồi(0)


Vui lòng Đăng Nhập hoặc Đăng ký để chia sẻ.
Đang tải...
Sản phẩm nổi bật
Thegioiic live support