/upload/medium/151.jpg

Phone

(28)3896.8699-0972924961

Sản phẩm mới
LM2576 Mạch Ổn Áp
Vào: 9-32VDC, Ra: 5V 4V 3.3V 2.7V hoặc 1.8VDC 3A
150,000 đ/Cái
Mạch Tăng Áp 500W
Vào: 9-14VDC, Ra: 35-48VDC, Công suất: 500W
1,203,000 đ/Cái
Mạch Khuếch Đại Âm Thanh HIFI 4 Kênh
Công suất: 4x50W, Nguồn: 12-16VDC, Kích thước: 95x79x20mm
636,000 đ/Cái
Mạch Tăng Áp 1500W
Vào: 10-60VDC, Ra: 12-90VDC, Công suất: 1500W
519,000 đ/Cái
TLP281-4
OPTOISO 2.5KV 4CH TRANS 16-SOP
18,000 đ/Cái
4P-ZH1.25-MM-15CM Cáp Cái-Cái
Dây bus 1.25mm 4Pin, 2 đầu Cái-Cái, dài 15CM
6,500 đ/Sợi
Module Shield 4 Relay
Relay 4 kênh 5V, Tương thích Arduino Mega2560 UNO R3
55,000 đ/Cái
UNO Screw Shield V1
Tương thích Arduino UNO R3
55,000 đ/Cái
Phản hồi mới
SN75175D

SN75175D

IC QUADRUPLE DIFFERENTIAL LINE RECEIVERS, 16SOIC

Nhà sản xuất: Texas Instruments

Còn: 149 Cái

Số lượng mua

0 Phản hồi 1841 lượt xem ROHS

Bảng giá

Số lượng
(Cái)
Đơn giá(VND)
1
15,000
10
14,500
20
14,000
50
13,500

  • Meet or Exceed the Requirements of ANSI
  • Standard EIA/TIA-422-B, RS-423-B, and
  • RS-485
  • Meet ITU Recommendations V.10, V.11, X.26, and X.27
  • Designed for Multipoint Bus Transmission on Long Bus Lines in Noisy Environments
  • 3-State Outputs
  • Common-Mode Input Voltage Range -12 V to 12 V
  • Input Sensitivity . . . ±200 mV
  • Input Hysteresis . . . 50 mV Typ
  • High Input Impedance . . . 12 k. Min
  • Operate From Single 5-V Supply
  • Low-Power Requirements
  • Plug-In Replacement for MC3486

 

 Description

 The SN65175 and SN75175 are monolithic quadruple differential line receivers with 3-state outputs. They are

designed to meet the requirements of ANSI Standards EIA/TIA-422-B, RS-423-B, and RS-485, and several ITU

recommendations. These standards are for balanced multipoint bus transmission at rates up to 10 megabits

per second. Each of the two pairs of receivers has a common active-high enable.

The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity

of ±200 mV over a common-mode input voltage range of ±12 V. The SN65175 and SN75175 are designed for

optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.

The SN65175 is characterized for operation from -40°C to 85°C. The SN75175 is characterized for operation

from 0°C to 70°C.

 

Download datasheet

Phản hồi(0)

FTeQD2  

Vui lòng Đăng Nhập hoặc Đăng ký để chia sẻ.
Đang tải...
Sản phẩm nổi bật
Thegioiic live support