/upload/medium/2389.jpg

Phone

(8)3896.8699-0972924961

Giỏ hàng 0 item(s)

Giỏ hàng trống

Danh Mục
Sản phẩm mới
Đang tải...
Bình luận mới
Sản phẩm đã xem
RF433M4C-BW

RF433M4C-BW

433.92MHz, Có thể học lệnh, Fixed Code 4-Channel RF Remote

0 Phản hồi ROHS

Nhà sản xuất: Chưa xác định

Còn : 65 Cái

Số lượng mua

1290 lượt xem

Bảng giá

Số lượng
(Cái)
Giá(VND)
1
57,000
10
55,000
20
53,000
50
51,000
100
49,000

Có sẵn móc khóa và pin để sử dụng ngay.

Có thể cung cấp các loại tần số sau: 310MHZ, 315MHZ, 330MHZ, 350MHZ, 390MHZ, 418MHZ, 430MHZ, 433MH


No.

Item

Specification

1

Working voltage

DC12V (27A battery)

2

Working current

≤12mA

3

Operating frequency

315MHz

4

Frequency windage

±0.2MHz

5

Transmitting power

≥10mW

6

Transmitting distance

20~50meters (open space)

7

Transmitting speed

50-60KHz

8

Encoder Model

HT12E,HT6P20B,HT6P20D,HCS300,HCS306

Có sẵn móc khóa và pin để sử dụng ngay.

Có thể cung cấp các loại tần số sau: 310MHZ, 315MHZ, 330MHZ, 350MHZ, 390MHZ, 418MHZ, 430MHZ, 433MHZ

http://thegioiic.com/upload/large/2979.jpg

Note: This is a fixed frequency remote control copy type , must meet the following three conditions :
1 , the frequency of the original remote controller must be the same as
2, the original remote control that can be compatible chip
3, the original remote control must be used properly
4 , rolling code remote control can not be copied
The remote copy operation is simple: first clear look at a copy of our remote control is on row 2 while holding down the button for a few seconds after the light is flashing continuously on behalf cleared and left hand . live your own remote control of a key , press and hold my hand for a remote control button , a few seconds later , my remote control lights flash , and on behalf of the copy is successful . two copies of the remote control to close the point , remote can stick together back to back , the better. )
This is a fixed frequency remote control duplicator free copies of a variety of automotive , switches and other anti- channel remote control transmitter and integration with the copy and for copies of various fixed code remote control.

First, the working principle outlined :
The remote control is a remote control signal transmitter receivers sensed when the remote control close to the transmitter can measure the field strength is high and know that we designed this section in accordance with this principle, the remote control has a receive mode and transmit mode, the microcomputer IC learning signal and stored , transferred after the completion of the transmission mode , and then bring up the code and the response by matching the antenna out .

Second, the remote control and set the parameters as follows:

Performance :

1, the product can be copied to the IC models 2262 2264 2,260,521,115,272,240,527 and compatible IC.

2 , without regard to the shock resistance , this product will automatically compatible shock resistance .

3, the product can not be copied as HCS300 301 and IC -compatible rolling code IC.

4 , This product uses batteries to 12V 27A, when the lack of remote distance , replace the battery .

5 , the remote control is a fixed frequency, commonly used to 315MHz; 433MHz. Please select the following specifications when ordering other frequencies :

303MHz / 310MHz / 330MHz / 350MHz / 370MHz / 390MHz / 418MHz / 430MHz

Copy Method: first determine the remote operating frequency.

    Clear codes and recovery
While holding down the top two buttons , etc. to determine the LED blinks off after about grimdeath , 2 S after the LED lights start flashing , indicating that the code has been cleared .

2 copies

Original remote control left hand , right hand holding the remote control in our tests , two remote control as close as possible . Press the two remote locking keys , 3 S LED will stop flashing , indicating that the original remote control lock key code has been our go Self learning remote control .

The other three buttons are also the same operation.

3 , recovery

When you accidentally remove a copy from the remote control key, you can press the start ( bell ) and mute ( Lightning ), 3 S LED will light up , then quickly flashes , indicating that the remote control code from the copy to be restored a .

Before using the remote control of our self- copy to copy , be sure to first remove the existing self- copy remote control code .

Here is a test from the remote copy existing code has not been successfully cleared of methods:

When you finish clearing code action , you can press any key, what if this time is not lit LED flashes , not lit, it shows that since the code is completely clear copy , if the LED is the point bright flashes about the state rather than later is off, copy the code from there .

Note: This is a fixed frequency remote control copy type , must meet the following three conditions :
1 , the frequency of the original remote controller must be the same as
2, the original remote control that can be compatible chip
3, the original remote control must be used properly
4 , rolling code remote control can not be copied
( Shenzhen takeoff technology - the remote copy operation is simple : first clear look at a copy of our remote control is on row 2 while holding down the button for a few seconds after the light is flashing continuously on behalf cleared and left hand . live your own remote control of a key , press and hold my hand for a remote control button , a few seconds later , my remote control lights flash , and on behalf of the copy is successful . two copies of the remote control to close the point , Duikao can stick together back to back , the better. )
This is a fixed frequency remote control duplicator free copies of a variety of automotive , switches and other anti- channel remote control transmitter and integration with the copy and for copies of various fixed code remote control.

First, the working principle outlined :

The remote control is a remote control signal transmitter receivers sensed when the remote control close to the transmitter can measure the field strength is high and know that we designed this section in accordance with this principle, the remote control has a receive mode and transmit mode, the microcomputer IC learning signal and stored , transferred after the completion of the transmission mode , and then bring up the code and the response by matching the antenna out .

Second, the remote control and set the parameters as follows:

[1] : Performance :

1, the product can be copied to the IC models 2262 2264 2,260,521,115,272,240,527 and compatible IC.

2 , without regard to the shock resistance , this product will automatically compatible shock resistance .

3, the product can not be copied as HCS300 301 and IC -compatible rolling code IC.

4 , This product uses batteries to 12V 27A, when the lack of remote distance , replace the battery .

5 , the remote control is a fixed frequency, commonly used to 315MHz; 433MHz. Please select the following specifications when ordering other frequencies :

303MHz / 310MHz / 330MHz / 350MHz / 370MHz / 390MHz / 418MHz / 430MHz

[2] : Copy Method: first determine the remote operating frequency.

    Clear codes and recovery

While holding down the top two buttons , etc. to determine the LED blinks off after about grimdeath , 2 S after the LED lights start flashing , indicating that the code has been cleared .

2 copies

   Original remote control left hand , right hand holding the remote control in our tests , two remote control as close as possible . Press the two remote locking keys , 3 S LED will stop flashing , indicating that the original remote control lock key code has been our go Self learning remote control .

The other three buttons are also the same operation.

3 , recovery

When you accidentally remove a copy from the remote control key, you can press the start ( bell ) and mute ( Lightning ), 3 S LED will light up , then quickly flashes , indicating that the remote control code from the copy to be restored a .  

Before using the remote control of our self- copy to copy , be sure to first remove the existing self- copy remote control code .

Here is a test from the remote copy existing code has not been successfully cleared of methods:

When you finish clearing code action , you can press any key from Khao , what if this time is not lit LED flashes , not lit, it shows that since the code is completely clear copy , if the LED is the point bright flashes about the state rather than later is off, copy the code from there .

Bình luận(0)

Mã xác nhận*

5KYBVQ  

Vui lòng Đăng Nhập hoặc Đăng ký để chia sẻ và tích luỹ điểm.
Đang tải...
Đang tải...
Bình chữa cháy
Thegioiic-live-support