/upload/medium/2400.jpg

Phone

(8)3896.8699-0972924961

Giỏ hàng 0 item(s)

Giỏ hàng trống

Danh Mục
Sản phẩm mới
Đang tải...
Bình luận mới
Sản phẩm đã xem
PLCC CHIP Extractor

PLCC CHIP Extractor

Dụng cụ tháo IC với kiểu chân PLCC

0 Phản hồi ROHS

Nhà sản xuất: Chưa xác định

Còn : 20 Cái

Số lượng mua

1359 lượt xem

Bảng giá

Số lượng
(Cái)
Giá(VND)
1
35,000
5
32,000

Model : HL-610
Product Name : IC puller gripping puller IC chip removal only.
Product description :

PLCC package dedicated IC chip ROM puller , the motherboard BIOS PLCC extractor designed for special puller . Body is made of stainless steel , to adapt to different sizes of PLCC.

1, can be easily removed without injury to any PLCC IC conductor from the substrate. Uprooted PLCC, PGA, PCLL, DIP IC packaging or may be in the PCB SOCKET .
2, with a handshake , the IC uprooted vertically stable ( non-use of force pull ) , leaving the IC can get a full pull of PIN.
3 , dense arrangement of the IC can be directly pulled out , do not need to move to another IC.
4, the contact surfaces of different sizes within the IC 5.5cm can pull it out in a very short time , simple operation and effort.
PLCC chip extractor , if using a flathead screwdriver , because there are other elements around , very smoothly , without a dedicated disconnect the clip , it is difficult to remove , and improper operation will cause damage to the socket or chip , and even cause the chip fracture , broken legs . We are ready for you to pull the chip from the folder directly on the board to use, convenient package PLCC chip extractor is pulling all kinds of chips, a good tool manifold for motherboards, microcontroller, programmer.

To pull this clip from the PLCC chip , better suited to facilitate PLCC chip extractor .

Can play DIP PLCC Dimensions: 20 feet to 84 feet.

Specific use , pull the clip from the feet were two notches from outside the chip socket is inserted , and then hold the clip , slightly clenched clip , easy to pull out the chip . For PLCC package of chips , due to its special package , they have to use a dedicated chip extractor folder to operate. Corner grip puller with ROM BIOS chip and its angle , hold down clip extractor , chip pull straight up from the socket. Note grip must be non- beveled corner where the chip extractor claw should be as deep socket. When improperly chip extractor , need considerable caution , improper handling or force may damage the motherboard or BIOS chip itself.

Bình luận(0)

Mã xác nhận*

4PEdsA  

Vui lòng Đăng Nhập hoặc Đăng ký để chia sẻ và tích luỹ điểm.
Đang tải...
Đang tải...
Bình chữa cháy
Thegioiic-live-support