/upload/medium/622.jpg

Phone

(28)3896.8699-0972924961

Giỏ hàng 0

Giỏ hàng trống

Danh Mục
Sản phẩm mới
ANTI-ST-CT-V2 Áo Chống Tĩnh Điện
Áo chống tĩnh điện, chống bụi, có nhiều màu, kích cỡ
119,000 đ/Cái
Anti-ST-HAT Nón Chống Tĩnh Điện
Có nhiều màu sắc
29,000 đ/Cái
ANTI-ST-STRAP Dây Chống Tĩnh Điện Giày
Dây Chống Tĩnh Điện Giày
29,000 đ/Cái
4.3inch FPGA LCD
LCD 4.3inch dùng cho board FPGA
1,190,000 đ/Cái
XC6SLX16 SPARTAN6 Xilinx FPGA Board
1Gb DDR3, 128Mb Flash, VGA, microSD, Jtag, USB
3,399,000 đ/Cái
XC6SLX9 SPARTAN6 Xilinx FPGA Board
SDRAM 256Mb, 16M Flash, VGA, microSD, Jtag, USB
1,349,000 đ/Cái
AD-DA-8Bit Module Chuyển Đổi AD-DA
DA chip: AD9708 8bit, AD chip: AD9280 8bit
589,000 đ/Cái
OV5640-V2 FPGA Camera
5M pixcel, size 70x40 mm, Camera dùng cho board FPGA
1,799,000 đ/Cái
Phản hồi mới
PL-2303HXD

PL-2303HXD

PL2303-HX (Rev.D) USB to Serial Bridge Controller

Nhà sản xuất: Prolific Technology

Hết hàng ROHS

Số lượng mua

0 Phản hồi 2292 lượt xem

Bảng giá

Số lượng
(Cái)
Đơn giá(VND)
1
29,000
5
28,500
10
28,000
20
27,500

OVERVIEW

The PL-2303HX is a low cost and high performance USB-to-Serial Bridge Controller. The PL-2303HX provides a convenient solution for connecting an RS-232 full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. The PL-2303HX highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready. The PL-2303HX is exclusively designed for mobile and embedded solutions in mind, providing a small footprint that could easily fit in to any connectors and handheld devices. With very small power consumption in either operating or suspend mode, the PL-2303HX is perfect for bus power operation with plenty of power left for the attached devices. Flexible signal level requirement on the RS-232 serial port side also allows the PL-2303HX to connect directly to 3.3V ~ 1.8V devices. PL-2303HX integrates on-chip clock generator and OTP ROM to save external crystal and EEPROM. Customers can design with effective BOM cost and compact PCB size.

  • Full compliance with the USB Specification v1.1
  • On-chip USB 1.1 transceiver and 5V3.3V regulator
  • Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps (Rev D)
  • Supports RS422/RS485 interface (Rev D)
  • Integrates on-chip Clock Generator (Rev D)
  • On-chip OTP (One Time Programming) ROM for startup device configurations like product string and serial number string (Rev D)
  • Extensive flow control mechanism like adjustable high/low watermark level, automatic hardware or software flow control, and inbound data buffer overflow detection
  • Configurable 256-byte outbound buffer and 256-byte inbound buffer; or 128-byte outbound buffer and 384-byte inbound buffer
  • Supports remote wake-up from MODEM input signals
  • Supports up to 8 GPIO pins (Rev D) - 4 General Purpose I/O pins & 4 Auxiliary General Purpose I/O
  • Package Type : SSOP28 / QFN32

 

Download (Go to Support Page for more):

Phản hồi(0)

Mã xác nhận*

QQfMwN  

Vui lòng Đăng Nhập hoặc Đăng ký để chia sẻ.
Đang tải...
Sản phẩm nổi bật
Thegioiic live support