Giỏ hàng 0 item(s)

Giỏ hàng trống

Danh Mục
Sản phẩm mới
Đang tải...
Bình luận mới
Sản phẩm đã xem
NXP LPC1758 Starter Kit

NXP LPC1758 Starter Kit

NXP LPC1758 processor, ARM Cortex-M3 Core, 100MHz

0 Phản hồi

Nhà sản xuất: Embest

Liên hệ đặt hàng

Số lượng mua

2334 lượt xem

Bảng giá

Số lượng

This is the low cost development kit for NXP LPC1758 (100MHz, the very fast Cortex-M3 processor), including the LPC1758 evaluation board(P758) and Emlink for ARM(EAH1)JTAG adapter, so the developers can easy start to learn and test all the relevant applications on it, or evaluate your new project design through this entire system.

NXP LPC1758 Starter Kit contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications:

  • NXP LPC1758 ARM Cortex-M3 Board
  • Keil MDK-ARM Development Kit, 32K evaluation edition
  • Emlink for ARM - a high speed JTAG Emulator for ARM Cortex-M3 processors
  • Plenty of example programs, all in source code  


NXP LPC1758 ARM Cortex-M3 Board:

  • Include one 2.4" TFT LCD (240*320)
  • NXP LPC1758 processor, based on ARM Cortex-M3 Core, 100MHz
  • 512KB internal flash and 64KB SRAM
  • XTAL Frequency: 12 MHz
  • Two RS232 Interfaces
  • Two CAN Interfaces
  • One 10/100M Ethernet Interface
  • One ETM Interface
  • One Micro SD Card Interface
  • One USB Device Interface
  • One USB Host Interface
  • One USB OTG Interface
  • One 20pins JTAG Interface
  • One 10pins Cortex Debug Interface
  • One 18pins Cortex Debug Interface
  • One TFT LCD Interface
  • One Joystick with 4-direction control and selector
  • One Analog Output (connected to speaker by default)
  • One Analog Input (connected to potentiometer by default)
  • Supply Voltage: 5V DC (provided by the USB bus of a PC)
  • Supply Current: 65mA typical, 120mA maximum
  • Board Size: 119mm x 119mm (4.68" x 4.68")


Click here to find more information about this NXP LPC1758 Cortex-M3 Board.


Keil MDK-ARM Development Kit


  • uVision IDE, debugger and simulation environment
  • ARM industry-leading C/C++ compiler from ARM
  • MicroLib highly optimized run-time library
  • Real-Time Trace for Cortex-M3 processor based devices
  • Keil RTX - deterministic Real-Time Operating System


More information about Keil MDK-ARM could be found in Keil website: http://www.keil.com.


Emlink for ARM

  • Supports debugging with Realview MDK and EWARM
  • Supports ARM Cortex-M3 processors: STM32, LPC17XX, AT91SAM3UE, etc.
  • JTAG 20 pins connects to target
  • Supports hardware and software breakpoints
  • Supports USB port connecting to host PC
  • Downloads and debugs speed up to 250KBytes/s (about 1.5Mbps)
  • Integrates seamlessly into IAR Embedded Workbench and Keil RealView MDK


Click here to find more information about this JTAG Emulator.



Plenty of example programs


Embest provides plenty of software examples for this NXP LPC1758 Cortex-M3 board, all in source code. These software examples can be debugged under the popular Keil MDK (Microcontroller Development Kit) environments, making practical use of the board's peripherals.


Example Programs

Example Programs


Mass_Storage Test


LCD_Blinky Test


Serial Interface Test

ADC Test

USB Test


TIM Test

SPI Test

CAN Test

PWM Test

Micro SD Test

RIT Test

Debug Emulation Test

Ethernet Test

LCD Test

Joystick Test

uC/OS-II transplantion Test

DAC Speaker Test

Blinky Test

Relevant Documentation Description Link & Attribute
Cortex-M3 selection guide NXP Cortex-M3 products comparison table  0.7KB
Cortex-M3 product list NXP Cortex-M3 products and their features  0.4KB
Leaflet of NXP Cortex-M3 Cortex-M3 based microcontrollers with Ethernet, USB, CAN and 12-bit ADC  123KB
Bình luận(0)

Mã xác nhận*


Vui lòng Đăng Nhập hoặc Đăng ký để chia sẻ và tích luỹ điểm.
Đang tải...
Đang tải...
Bình chữa cháy